Hydraulic Unit Cement Mixer Parts Simple And Convenient Maintenance
Discharging Door
The limited switch installed, can be convenient to set the size of the door according to the need. At most three discharge doors can be opened.
The use of mixer
1. Before use, the machine should have an empty test. Before the test machine, the firmness of all the connecting parts of the machine table shall be checked first, especially if the bearing part is loose during transportation. Close the main switch, access the power supply, run the empty test machine.
2. Empty machine test. The mixer can only be put into production without abnormal sound, high heat of bearing gear, etc.
3. If abnormal vibrations or strange sounds are detected during use, stop the mixer and give a thorough inspection.
4. The load should not be too large. It is generally measured by the load of the motor. The load current of the 380V motor when stirring the material should not exceed 6 amps. If it exceeds the load, the stirring capacity should be reduced immediately.
5. Managers should be familiar with the technical performance, internal structure, control structure, and operating principle of the mixer. Do not leave the workplace during operation to prevent malfunctions and damage to mechanical parts, so as to ensure safe production.
Maintaining Door
The safety control device ensures that the mixer will not start during maintenance. Large size maintaining door for easy maintenance and cleaning.
Spare parts
Spare parts can be supplied at any time.
Product Tags:
|
|
Precast Cement Mixer Repair Parts , Discharging Door Concrete Batch Plant Parts Images
|
